跳至主要内容

Autel MK808 Airbag Reset For Porsche

 

Autel MaxiCOM MK808 diagnostic tool supports Porsche module access all available car electronic systems like ABS, SRS(Airbag), Engine, Transmission, Brake Systems and etc.

Today, Auteldia.com is gonna show you the newest Autel MK808 Airbag car list for Porsche and the guide to use (to do an airbag reset on a 2013 Porsche Cayenne as an example)

Part 1: Autel MaxiCOM MK808 Airbag service car list for Porsche
911(991)
Airbag
ECU information
Live data
Trouble codes

911(996)

Airbag

ECU information
Live data
Read codes

92A – Cayenne(2011 to 2017)

Airbag

ECU information
Live data
Read codes

970 – Panamera(up to MY 2017)

Airbag

ECU information
Live data
Trouble codes

971 – Panamera(from MY 2017)

Airbag

ECU information
Live data
Trouble codes

9PA-Cayenne(up to 2010)

Airbag

ECU information
Live data
Erase codes
Read codes

9YA – Cayenne(from MY 2017)

Airbag

ECU information
Live data
Trouble codes

Boxster/Cayman(981)

Airbag

ECU information
Live data
Trouble codes

Boxster/Cayman(982)

Airbag

ECU information
Live data
Trouble codes

Boxster/Cayman(986)

Airbag

ECU information
Live data
Erase codes
Read codes

Carrera GT

Airbag

ECU information
Live data
Erase codes
Read codes

GT2(996)

Airbag

ECU information
Live data
Erase codes
Read codes

GT3(996)

Airbag

ECU information
Live data
Erase codes
Read codes

Macan

Airbag

ECU information
Live data
Trouble codes

Part 2: How to reset an Airbag warning light with the Autel MK808 for 2013 Porsche Cayenne

As you can see, the Porsche has the airbag light showing on the dashboard, So let me plug the Autel MK808 into the OBD2 port, and get to start:

Diagnostics >> Porsche >> Automatic selection >> Read >> OK

2013-porsche-cayenne-air-bag-reset-via-autel-mk808-1 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-2 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-3 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-4 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-5 (2)

Yes >> Control unit >> Airbag >> Read codes

There is a fault code B100B1B, it says driver side airbag, limit value exceeded. I had already had a look around once I found this code. And I found a loose connection underneath the driver’s seat. I’ve put the loose connection back together but it is still obviously getting the airbag light.

2013-porsche-cayenne-air-bag-reset-via-autel-mk808-6 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-7 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-8 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-9 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-10 (2)

So all I need to do is to erase the codes, I should be able to get rid of the airbag light and the fault codes.

Press “Erase codes”.

The ignition on and the engine off? Press “Yes”.

DTCs and freeze data will be deleted. Press “Yes” to continue.

Codes have been successfully erased. The airbag light has gone.

Now go back to read codes to verify. It is telling no fault codes detected.

2013-porsche-cayenne-air-bag-reset-via-autel-mk808-12 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-13 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-14 (2)
2013-porsche-cayenne-air-bag-reset-via-autel-mk808-15 (2)

Done!

Thanks to Autel MK808 Diagnostic Tool to reset airbag warning light for this Porsche Cayenne. It covers all sorts of special functions such as Oil reset, TPMS, DPF, BMS SAS…to do as well.

标签：

评论

发表评论

此博客中的热门博文

How to Replace and Reprogram Chrysler FCM with DRB III

  SUBJECT: Replacing or reprogramming the Front Control Module (FCM) OVERVIEW: Erroneous Actuation of Horns, Headlamps, and Parking Lamps while vehicle is parked MODELS: 2001 – 2004 (RG) Chrysler Voyager (International Markets) 2001 – 2004 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION: While the vehicle is parked the customer may experience the horn sounding on and off, flashing the headlamps and the parking lamps as if the security alarm was actuated. The technician may find the vehicle is not equipped with Security Alarm system (sales code LSA). DIAGNOSIS: 1. Using a Scan Tool (DRBIII®) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTCs are present record them on the repair order and repair as necessary before proceeding further with this bulletin. 2. Determine the “Hardware Part #” of the FCM. Using the DRB III select: 3. DRBIII Standalone 4. 1998 – 2005 Diagnostics 5. All 6. Body Interi
发表评论
阅读全文

How to update BMW ICOM A2 or ICOM NEXT Firmware

  When using the latest ISTA D software to do BMW diagnosis, icom hareware can be detected, but the device doesn’t communicate with the vehicle,  can’t enter modules reading page, like below picture: What’s the solution? The firmware doesn’t match with the  latest ISTA sofware, firmware need to be updated. ICOM firmware update steps: 1. Need the latest updated file for ICOM firmware: 2.Charge ICOM hardware, connect the vehicle, use ISTA engineering sofware IToolRadar to detect the IP address of  ICOM hardware, see below picture, the IP address can be found as 169.254.92.38 3. Open Internet Explorer Input the IP address which is deteced above to the address bar: like http://169.254.92.38:60080 username: root password: NZY11502 4. Click “update firmware” after login 5. Follow below steps: 6. Need to wait seconds, and click  “yes” when below  page show up: 7. During ICOM firmware update, four light on ICOM are all read, need to wait 3~5 minutes, when update fin
发表评论
阅读全文

How to update the firmware of ICOM NEXT A

Upgraded the new version of  BMW Diagnostic Software ISTA. When connected to the vehicle, click to start the vehicle to detect ICOM, but the State is Firmware. At this time, you need to upgrade the firmware of BMW ICOM Next ； ICOM NEXT A firmware upgrade steps 1. First, you need the firmware file of the new version of ICOM NEXT, the ICOM NEXT firmware file has a name with ICOM NEXT XXX, The two files xxx root xxx and xxx app xxx need to be upgraded. (Firmware version is different, the file name is different, but all versions of the firmware have the file name of ICOM_Nextxx) 2.ICOM NEXT A is connected to the car, usually the OBD interface of the car (the same method as the car diagnosis), open the diagnostic software ISTA, or use the software ITool Radar, you can detect the IP address of ICOM NEXT (IP address is automatically obtained), The IP address detected by the ISTA software is 169.254.192.155; 3.Open the IE browser, enter the IP address and port number of ICO
发表评论
阅读全文