跳至主要内容

How OBDSTAR X300 DP Plus Program 2016 Toyota Smart Key with NO.3 Simulated Card

 

This post will present a process how OBDSTAR X300 DP PLUS program 2016 Toyota smart key with simulated card.

Car model: 2016 Toyota
Tools in this process:
1.  OBDSTAR X300 DP Plus
2.  P001 Programmer
3.  NO.3 Simulated card
Note: both P001 and simulated card are contains in the OBDSTSR X300 DP Plus package

After connected them together, choose TOYOTA/SCION/LEXUS in IMMOBILISER.

Choose “smart key system”->”type 5 (All smart keys lost)”

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-1

Read EEPROM

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-2

NOTE: 1. This function can read (backup) vehicle EEPROM data
2. after read (backup) of vehicle EEPROM data, the simulated card is generated with this data
3. using simulated card attach start button to illuminate instrument and instead of original car key to [Add Smart Keys]

Save the file, and you could rename it in this step

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-3

Appear a guide: the vehicle EEPROM data backup was successful. Please execute the [Make Simulated Card] function
As the guide saying, choose “make simulated card’

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-4

Choose the vehicle EEPROM data that saved just now:

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-5

Connect P001 programmer to X300 DP Plus

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-6

A note will remind you to put NO.3 simulated card(red) into P001 programmer

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-7

Generate simulated card successfully
Move the simulated card close to the start button and try to light the meter. If you can light up the meter normally, use the simulated instead of the original car key for [Add Smart Key] operation.

How-OBDSTAR-X300-DP-Plus-Program-2016-Toyota-Smart-Key-8

The simulated card successfully light the meter then use it to do add smart key process.
Here skip the smart key programming steps. Follow the guide on the x300 dp plus and you can make it.
Or if you want to view the key programming process, here is the process X300 DP Plus do Mazda all key lost for you to check.

Also, attach a video about the above steps: OBDSTAR X300 DP Plus with Simulated Card Programs 2016 TOYOTA All Key Lost

Which type of smart keys can be simulated?
Simulated key 1 applies to the vehicle with 94/D4 type of smart key;
Simulated key 2 applies to the vehicle with 98 type of smart key;
Simulated key 3 applies to the vehicle with 88/A8 type of smart key;
Simulated key 4 applies to the vehicle with A9 type of smart key;

评论

此博客中的热门博文

How to Replace and Reprogram Chrysler FCM with DRB III

  SUBJECT: Replacing or reprogramming the Front Control Module (FCM) OVERVIEW: Erroneous Actuation of Horns, Headlamps, and Parking Lamps while vehicle is parked MODELS: 2001 – 2004 (RG) Chrysler Voyager (International Markets) 2001 – 2004 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION: While the vehicle is parked the customer may experience the horn sounding on and off, flashing the headlamps and the parking lamps as if the security alarm was actuated. The technician may find the vehicle is not equipped with Security Alarm system (sales code LSA). DIAGNOSIS: 1. Using a Scan Tool (DRBIII®) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTCs are present record them on the repair order and repair as necessary before proceeding further with this bulletin. 2. Determine the “Hardware Part #” of the FCM. Using the DRB III select: 3. DRBIII Standalone 4. 1998 – 2005 Diagnostics 5. All 6. Body In...

How to connect ENET WIFI to BMW ISTA

  How to connect ENET WIFI to  BMW Diagnostic Software BMW ISTA 1.The ENET WIFI interface is connected to the OBD interface of the BMW cab; 2.PC connected to ENET WIFI wirelessly, the ENET WIFI password is 12345678; 3.Open BMW ISTA diagnosis and check the connection settings 4.WiFi interface selected by ISTA connection manager; 5.Successfully connected, read BMW ECU.

How to install john deere service advisor 4.2.005 on win 10 64bit

  John deere EDL V2 diagnostic kit with Service Advisor EDL V2 V4.2 Software, you can view service manuals, use DTAC (Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers. John Deere EDL V2 Highlight 1. John Deere Service Advisor EDL (Electronic Data Link) heavy duty diagnostic adapter for construction equipment, agriculture, engines For John Deere. 2. John Deere Diagnostic kit includes software For John Deere Service Advisor 4.0 Agriculture or Construction and Forestry version. 3. John Deere Service Advisor 4.0 Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission. 4. John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, T...