跳至主要内容

Lonsdor K518POL Fiat Ducato 2008 ID46 Programming of the remote control

How to use Lonsdor K518S/K518ISE to program Fiat Ducato 2008 ID46 Key successfully Video:
This is original working Fiat Ducato 2008 ID46 key.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-1
Use the original key to turn on the ignition.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-2
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-3
Plug the Lonsdor K518S key programmer into Fiat car, tap “Immobilizieir -> Fiat -> Europe-> Ducato -> 2006-> 2012 (250) -> Backup EEPROM”.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-4
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-5
Downloading application.
Loading…
Please switch ignition ON.
Communication connecting, please wait…
Configuring system, please wait…
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-6
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-7
Please switch ignition switch off.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-8
Reading EEPROM data.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-9
Please enter the name of the file to be saved.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-10
Please make sure the input is correct! Ducato_2008_ID46.bin.
Backup success.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-11
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-12
If oil gauge’s indicator flashes, please cut off power supply or power off BCM for a few secs.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-13
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-14
Back to the menu to select “Make dealer key (46 & 48 chip).
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-15
Downloading application…
Loading…
Please select “46 chip key”, and put the new blank new into the slot of Lonsdor K518S.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-16
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-17
Select “PCF7946 (8PIN).
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-18
Select the file.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-19
Push the device key slot (to the right). Place the key to be programmed into key slot.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-20
Writing key data.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-21
Generate the dealer key and lock the key success.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-22
ID: B175412B.
Tap ” Program key”.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-23
Note: the working keys also need to be programmed, otherwise they will turn invalid.
The new key (to be programmed) must be dealer key or customized key.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-24
Please switch ignition ON.
Please input the pin.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-25
Program key successfully, take off the original key from the ignition and insert the new programmed key to turn on the ignition.
And test if the remote works.
Lonsdor-K518POL-Fiat-Ducato-2008-ID46-Programming-of-the-remote-control-26
That’s all! Lonsdor K518S Key Programmer can program Fiat Ducato 2008 ID46 Key perfectly.
Thanks
标签：

评论

发表评论

此博客中的热门博文

How to Replace and Reprogram Chrysler FCM with DRB III

  SUBJECT: Replacing or reprogramming the Front Control Module (FCM) OVERVIEW: Erroneous Actuation of Horns, Headlamps, and Parking Lamps while vehicle is parked MODELS: 2001 – 2004 (RG) Chrysler Voyager (International Markets) 2001 – 2004 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION: While the vehicle is parked the customer may experience the horn sounding on and off, flashing the headlamps and the parking lamps as if the security alarm was actuated. The technician may find the vehicle is not equipped with Security Alarm system (sales code LSA). DIAGNOSIS: 1. Using a Scan Tool (DRBIII®) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTCs are present record them on the repair order and repair as necessary before proceeding further with this bulletin. 2. Determine the “Hardware Part #” of the FCM. Using the DRB III select: 3. DRBIII Standalone 4. 1998 – 2005 Diagnostics 5. All 6. Body In...
发表评论
阅读全文

How to update BMW ICOM A2 or ICOM NEXT Firmware

  When using the latest ISTA D software to do BMW diagnosis, icom hareware can be detected, but the device doesn’t communicate with the vehicle,  can’t enter modules reading page, like below picture: What’s the solution? The firmware doesn’t match with the  latest ISTA sofware, firmware need to be updated. ICOM firmware update steps: 1. Need the latest updated file for ICOM firmware: 2.Charge ICOM hardware, connect the vehicle, use ISTA engineering sofware IToolRadar to detect the IP address of  ICOM hardware, see below picture, the IP address can be found as 169.254.92.38 3. Open Internet Explorer Input the IP address which is deteced above to the address bar: like http://169.254.92.38:60080 username: root password: NZY11502 4. Click “update firmware” after login 5. Follow below steps: 6. Need to wait seconds, and click  “yes” when below  page show up: 7. During ICOM firmware update, four light on ICOM are all read, need to wait...
发表评论
阅读全文

How to update the firmware of ICOM NEXT A

Upgraded the new version of  BMW Diagnostic Software ISTA. When connected to the vehicle, click to start the vehicle to detect ICOM, but the State is Firmware. At this time, you need to upgrade the firmware of BMW ICOM Next ； ICOM NEXT A firmware upgrade steps 1. First, you need the firmware file of the new version of ICOM NEXT, the ICOM NEXT firmware file has a name with ICOM NEXT XXX, The two files xxx root xxx and xxx app xxx need to be upgraded. (Firmware version is different, the file name is different, but all versions of the firmware have the file name of ICOM_Nextxx) 2.ICOM NEXT A is connected to the car, usually the OBD interface of the car (the same method as the car diagnosis), open the diagnostic software ISTA, or use the software ITool Radar, you can detect the IP address of ICOM NEXT (IP address is automatically obtained), The IP address detected by the ISTA software is 169.254.192.155; 3.Open the IE browser, enter the IP address and port number of...
发表评论
阅读全文